Susceptibility to Interference
There may be temporary degradation of the image
when the SmartView Synergy is subjected to a strong
radiofrequency field, electrostatic discharge or
transient electrical noise. An electrostatic discharge
(caused by static electricity) may cause the screen
to go blank. If this happens, switch the unit off and
on again.
Medical Compliance Warnings
Electromagnetic compatibility: The use of accessories
and cables other than those specified by HumanWare
may result in increased emissions or decreased im
munity of the SmartView Synergy.
Placement of equipment: The SmartView Synergy
should not be used adjacent to or stacked with
other equipment.
FCC Warning
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equip
ment generates uses and can radiate radio frequency
To Next Page
Loading...
Need help?
General
