Hummer 2004 H2 User Manual

GM Oil Life System
Press the fuel information button until ENGINE OIL LIFE
appears in the display. The GM Oil Life System shows
an estimate of the oil’s remaining useful life. It will show
100% when the system is reset after an oil change. It
will alert you to change your oil on a schedule consistent
with your driving conditions.
Always reset the engine oil life after an oil change. To
reset the Oil Life System use the fuel button to reach the
ENGINE OIL LIFE screen and then press and hold the
select button for five seconds while ENGINE OIL LIFE is
displayed. OIL LIFE RESET will appear on the display for
10 seconds to let you know the system is reset.
The DIC does not replace the need to maintain your
vehicle as recommended in the Maintenance Schedule
in this manual. Also, the oil change reminder will not
detect dusty conditions or engine malfunctions that may
affect the oil. Also, the oil change reminder does not
measure how much oil you have in your engine. So, be
sure to check your oil level often. See Engine Oil on
page 5-14.
Personalization Button
You can program certain features to a preferred setting
for up to two people. Press the personalization button
to scroll through the following personalization features.
All of the personalization options may not be available
on your vehicle. Only the options available will be
displayed on your DIC.
• AUTOMATIC LOCKING
• AUTOMATIC UNLOCKING
• DELAYED LOCKING
• REMOTE LOCK FEEDBACK
• ALARM WARNING TYPE
• REMOTE UNLOCK FEEDBACK
• HEADLAMPS ON AT EXIT
• PERIMETER LIGHTING
• SEAT POSITION RECALL
• EASY EXIT DRIVER SEAT
• CURB VIEW ASSIST
• DISPLAY LANGUAGE
• DISPLAY UNITS (ENG/MET)
3-48

Hummer 2004 H2 Specifications

General

Brand	Hummer
Model	2004 H2
Category	Automobile
Language	English