Instrument Panel Fuse Block
The fuse block access
door is located on the
driver’s side edge of the
instrument panel. Pull
off the cover to access the
fuse block.
To remove fuses if you don’t have a fuse extractor, hold
the end of the fuse between your thumb and index
finger and pull straight out.
You may have spare fuses located behind the fuse
block access door. These can be used to replace a bad
fuse. However, make sure it is of the correct amperage.
Fuses Usage
RR Wiper Rear Window Wiper Switch
SEO ACCY
Special Equipment Option
Accessory
WS WPR Windshield Wipers
TBC ACCY
Truck Body Controller
Accessory
IGN 3 Rear Heated Seats Module
4WD
Four-Wheel Drive Switch, Air
Suspension Switch/Module
5-103
To Next Page
Loading...
