Need help?Do you have a question about the Humminbird 787C2 and is the answer not in the manual?
General| Brand | Humminbird |
|---|---|
| Model | 787C2 |
| Category | GPS |
| Language | English |
Explains the 200/83 kHz DualBeam PLUS™ sonar system.
Explains QuadraBeam PLUS™ sonar with optional transducer.
Explains WideSide® sonar with optional transducer.
Explains Universal Sonar 2 integrated transducer.
Explains the Sonar View, historical log of sonar returns.
Shows sonar information from left/right/down beams with optional transducer.
Displays information from the 455 kHz WideSide® transducer.
Shows cartography from built-in UniMap™ or optional MMC map.
Explains stored positions (waypoints), paths (routes), and history (tracks).
How to manage waypoints (save, edit, delete).
Steps to navigate to a saved waypoint or cursor position.
How to add targets or trolling grids to waypoints.
Managing saved routes (create, edit, delete, travel).
Saving or clearing the current track.
Managing saved tracks (edit, delete, hide/display).
Procedure for activating and canceling MOB navigation.
Controls power, backlight, and contrast.
Navigates menus, positions cursor, controls playback.
Marks waypoints and captures screen images.
Starts navigation to waypoints and activates MOB.
Menu options during power-up (Normal, Simulator, etc.).
View system connections and conduct self-tests.
Quickly move cursor to any saved waypoint.
Save the current track being displayed.
Save the current route being displayed.
Discard current route and exit Navigation Mode.
Remove MOB waypoint and exit MOB navigation mode.
Start sonar recording from Snapshot and Recording View.
Sets which sonar returns from the transducer are displayed.
Interprets sonar returns and displays a Fish Symbol.
Selects the transducer to be used.
View the Current Track submenu.
View the Waypoints submenu.
View the Routes submenu.
Sounds when depth is less than or equal to the setting.
Sounds when battery voltage is low.
Sounds when boat moves too far off course.
Sets menu system to Normal or Advanced.
Conditions causing problems with displayed information.
Identifies sources of electrical noise and interference.
To Next Page
