Need help?Do you have a question about the Humminbird 797C2 and is the answer not in the manual?
General| Display Type | Color TFT |
|---|---|
| GPS | Yes |
| Chartplotting | Yes |
| Waterproof Rating | IPx7 |
| Waypoints | 3000 |
| Routes | 50 |
| Power Output | 500 Watts (RMS) |
| Target Separation | 2.5 inches |
| Sonar Frequency | 200 kHz |
| Sonar Frequencies | 83/200 kHz |
| Transducer Type | Dual Beam |
| Sonar Type | Dual-beam |
| Max Depth | 1500 ft |
| Depth Capability | 1500 ft |
| GPS Receiver | Internal |
| Display Size | 5 inch |
| Sonar Coverage | 60° / 20° |
Provides a wide, precise survey of water area with detailed bottom topography.
Uses 200/83 kHz sonar with wide 60° coverage and a focused 20° center beam.
Adds two 455 kHz beams for wide 90° coverage, plus DualBeam PLUS™ below.
Integrated transducer for trolling motors, offering temperature sensing and DualBeam PLUS™ performance.
Used for optional-purchase cards containing detailed maps or software updates.
Update control head software via the MMC/SD slot with a software update file.
Explains recognizable features on the display like topography, bottom return, depth, speed, and shadows.
Explains how side imaging uses precise sonar beams to create a picture-like image of the bottom.
Provides tips for interpreting side imaging display, covering boat speed, navigation, and beam coverage.
Describes a second return below the bottom contour, indicating bottom hardness.
Shows cursor depth, bottom depth, lat/lon, distance, and bearing if GPS is active.
Shows a shadowed right/left view of the bottom as the boat passes over.
Displays regular sonar and side imaging sonar in a split screen.
Presents historical log of sonar returns, depth, temperature, and speed.
Shows a 3-D perspective view of the track and land contour.
Displays cartography from built-in UniMap™ or optional map cards.
Split screen with Chart View on left and Sonar View on right.
Turns the unit on/off and adjusts backlight/contrast.
Accesses the menu system, including Start-Up Options, X-Press™, and Main Menu.
Creates waypoints, starts navigation, or activates Man Overboard (MOB) function.
Options to select Normal, Simulator, System Status, or PC Connect upon startup.
Provides quick access to frequently-used settings without navigating the full menu system.
Allows viewing the Waypoints submenu for creating, editing, deleting, targeting, or gridding waypoints.
Allows viewing the Routes submenu for creating, editing, deleting, or traveling routes.
Sets which sonar returns from the transducer will be displayed on the screen.
Adjusts the sonar noise filter to limit interference from various sources.
Allows selection of the transducer to use with the Fishing System.
Alerts when the boat reaches a set depth or shallower.
Alerts when the input battery voltage drops below a critical level.
Alerts when the boat moves too far off the intended navigation course.
Selects units of measure for all depth-related readouts.
Sets the menu system to Normal for simplicity or Advanced for more control.
Resets all menu settings to their factory defaults.
Troubleshooting steps if the system does not power up, checking cables, fuse, and battery voltage.
Addresses issues with control head power at high speeds or inconsistent sonar readings.
To Next Page
