105
Depth Lines
(Advanced)
Depth Lines divide the display into four equal sections which are separated by
three horizontal depth lines. The depth of each line is displayed along the depth
scale. You can either turn Depth Lines On or Off. The Depth Lines menu choice is
available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).
T
o change the Depth Lines setting:
1. Make sure you are in Advanced User Mode, then highlight Depth Lines
on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn the Depth
Lines setting On or Off. (Off, On, Default = On)
Depth Lines
Depth Lines
To Next Page
Loading...
