Hunter 20578 - Completing Your Installation with a Bowl Light Fixture

16
42798-01 • 12/28/09 • Hunter Fan Company
16
9 • Completing Your Installation With a Bowl Light Fixture
69
69
30
30
9.29.1
9.3
Partially install inner switch housing screws (69) into the switch housing
mounting plate.
Align the keyhole slots in the upper switch housing with the inner switch
housing screws (69). Turn the housing counterclockwise until the inner
switch housing screws (69) are rmly situated in the narrow end of the
keyhole slots. Install the remaining screw into the housing. Tighten all
three screws rmly.
Your Hunter fan comes with an integrated light xture assembly and an optional
switch housing cap and plug button. is feature gives you the option of installing
the fan with OR without the included light xture. If you want to install the
light fixture, proceed with Step 9.4 now. If you do not want to install the light
fixture, you need to remove it now. See Step 10.1, “Removing the Light Fixture.”
Once you have removed the light xture, continue with Step 9.4.
Feed the upper plug connector through the center opening of the upper
switch housing (30).