18
42798-01 • 12/28/09 • Hunter Fan Company
18
9.10
9.11
9.9
115
150
149
Place the cover plate (115) up against the glass bowl (150). Align the holes
in the cover plate (115) with the grommet hole of the metal disc.
Screw the nial (149) onto the threaded nial rod end until tight.
9 • Completing Your Installation With a Bowl Light Fixture (cont.)
9.8
150
Lift the glass bowl (150) up so the threaded nial rod ts through the hole
in the glass bottom.
You can mount the remote holder to any toggle switch plate with the
screws already in the switch plate. Or, you can simply mount the remote
holder on the wall.
To Next Page
Loading...
