16
contatobrasil@hunterfan.com
MD511-01 • 05/20/14 • © Hunter Fan Company
Light Kit
Install a 14W CFL bulb (sold separately) into
the E27 socket. When necessary, replace with
bulb of same wattage.
To reinstall the globe assembly, align the posts on
the globe assembly with the holes in the shroud.
Make sure that the chain holes in the globe
assembly also line up with the chain holes in the
shroud. Lift the globe and posts until the threaded
end of the posts are visible through the shroud.
Install the three acorn nuts onto the posts so that
the light kit is secured to the shroud.
Make sure the globe assembly is securely attached to the
shroud. Failure to properly secure all three acorn nuts could
result in the light xture falling.
Post
Acorn
Nut
Acorn
Nut
Unscrew the three acorn nuts by hand
and carefully detach the globe assembly
from the shroud.
To Next Page
Loading...
Need help?
General