Hunter Fans - Step 9 - Replacing the Light Bulb

21
®
41557-01 3/12/2002
Instructions for unassembling the
globe when replacing a light bulb.
1. Unassemble the finial assembly
as shown in Figure 9a.
2. Install one 100 Watt light bulb.
Refer to Figure 9b.
3. Loosely reassemble the finial
bracket, cover plate, and finial.
Refer to Figure 9a.
STEP 9 - REPLACING THE LIGHT BULB
4. Assemble the finial to the bot-
tom of the globe assembly as
shown in Figure 9c. Viewing the
assembly through the globe, line
up the finial bracket with the
tabs in the bottom part of the
globe assembly.
5. Securely tighten the finial.
Figure 9a - Unassembling the finial Figure 9b - Installing bulb Figure 9c - Assembling the finial
Finial Bracket
Finial
Cover Plate
Globe Assembly
Light Bulb
Finial
Assembly