Go to previous screen (changes not saved)
Go to Home screen (changes not saved)
GREEN items indicate settings which can be changed
GREY items indicate status information
All items on each screen are color coded to indicate which screen elements are buttons
and which screen elements indicate status information.
GREEN screen items indicate settings that can be changed. If you touch on the GREEN
color item then you'll be able to change that setting.
GREY colored items indicate status information. Touching on these has no effect.
If you're entering information into the controller and use the Home or Back buttons then
your changes on that screen will not be changed.
The charts below will walk you through the different function paths when programming at
the controller with and without internet.
OFFLINE STANDARD MODE
Adjust Time: Home > Settings > Offline Programs and Settings >Time
Enable Wi-Fi: Home > Settings > Offline Programs and Settings > Enable Wi-Fi
Program Sensor/Check Status:
Home > Settings > Offline Programs and Settings > Sensors >
Configure to level type for normally closed style.
Start Times:
Home > Settings > Offline Programs and Settings > Offline
Programs > Edit Start Times
Water Days:
Home > Settings > Offline Programs and Settings > Offline
Programs > Edit Water Days
Zones:
Home > Settings > Offline Programs and Settings > Offline
Programs > Edit Zones
Master Valve:
Home > Zones > Zone > Click blue bar > Select Master Valve >
Confirm
Set Seasonal Adjust:
Home > Settings > Offline Programs and Settings > Seasonal
Adjust
OFFLINE ADVANCED MODE
Adjust Time: Home > Settings > Offline Programs and Settings >Time
To Next Page
Loading...
Need help?
General
