Enable Wi-Fi: Home > Settings > Offline Programs and Settings > Enable Wi-Fi
Program Sensor/Check Status: Home > Settings > Offline Programs and Settings > Sensors
Start Times:
Home > Settings > Offline Programs and Settings > Offline
Programs > Edit Start Times
Water Days:
Home > Settings > Offline Programs and Settings > Offline
Programs > Add or Modify
Zones: Home > Zones > Choose Zone > Run Time > OK
Master Valve:
Home > Zones > Zone > Click blue bar > Select Master Valve >
Confirm
Set Seasonal Adjust:
Home > Settings > Offline Programs and Settings > Seasonal
Adjust
ONLINE MODE
Change Wi-Fi/Check Status: Home>Settings>Wireless>Select a Setting to Modify
Controller Status: Home>Status>Controller Status
Program Expander: Home>Status>Expansion Modules
Manually Run Zone(s): Home>Zones>Select Zone> Run>Enter Time>OK
Model: Home>Status>Controller Status
Network Status: Home>Status>Network
Reboot Controller: Home>Settings>Config>Reboot Controller
Reset Controller: Home>Settings>Config>Factory Default
Run Wizard: Home>Settings>Run Wizard
Sensor Status: Home>Status>Sensor
Serial Number: Home>Status>Controller Status
Server Status: Home>Status>Controller Status
Test Network: Home>Status>Network>Test Network
Test Zone: Home>Status>Zone Tester
Time and Date: Home>Status>Time
To Next Page
Loading...
Need help?
General
