Hunter NODE-BT User Manual


+
+
EN
1. Unlock the battery compartment by rotating the cap counter-
clockwise until collar and cap are removed.
2. Insert one or two 9-volt alkaline batteries into the battery
terminals. Observe and match the + position.
3. Secure the battery compartment by rotating clockwise until
tightened.
4. Test power to the NODE-BT by pressing the battery check
button on the front of the controller. Observe and check for the
illuminated green LED. If the LED is red, the battery needs a
replacement.
Accessing and Replacing the Battery

Visit hunter. direct/nodebtios
Visit hunter. direct/nodebtandroid
Download the free Hunter NODE-BT app to a smartphone device
from the iTunes® Store for iOS® devices, or the Google Play™ store
for Android™ devices.
Requires iOS 9.0 or later. Compatible with iPhone®, iPad®, and
iPod touch® devices. Requires Android 5.0 or above.
App Programming
EN
1. Be in range of the controller.
2. Turn on Bluetooth on the smartphone device.
3. Press the SCAN button and connect to a NODE-BT controller.

Hunter NODE-BT Specifications

General

Brand	Hunter
Model	NODE-BT
Category	Controller
Language	English