Hunter Roam User Manual

Owner’s Manual and
Installation Instructions
For use with Hunter Controllers
with SmartPort
®
Connection
Residential/Light Commercial
Remote Control System
Owner’s Manual and
Installation Instructions
For use with Hunter Controllers
with SmartPort
®
Connection
Residential/Light Commercial
Remote Control System

Hunter Roam Specifications

General

Compatibility	Compatible with Hunter controllers
Power Source	Battery
Number of Buttons	6
Type	Wireless Remote
Range	305 m
Weight	0.4 lbs
Battery Life	Approximately 1 year

Summary

INSTALLATION AND WIRING

WIRING HARNESS/SMARTPORT CONNECTION KIT

Details the components of the wiring harness and SmartPort connection kit.

INSTALLING THE ROAM REMOTE WIRING HARNESS

Details the physical installation of the wiring harness and SmartPort into the controller housing and conduit.

WIRING THE SMARTPORT TO HUNTER CONTROLLERS

Explains how to connect the SmartPort wiring harness to different Hunter controller models (SRC, Pro-C, ICC).

TYPICAL INSTALLATION

CHANGING STATION RUN TIME

CHANGING TRANSMITTER ADDRESS

CHANGING MAXIMUM STATION NUMBER

PREPARING THE RECEIVER FOR USE

RECEIVER INSTALLATION WARNING

Warns against permanent outdoor installation of the ROAM remote receiver.

CHANGING RECEIVER ADDRESS

ACTIVATING A STATION WITH ROAM REMOTE

ROAM ACTIVATION AND SENSOR OVERRIDE

Explains ROAM's activation capabilities across controller modes and its inability to override sensors.

TROUBLESHOOTING GUIDE