EasyManua.ls Logo

Hunter Seville User Manual

Hunter Seville
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
© 2007 Hunter Fan Company 41865-01 01/15/2007
1
41865-01 01/15/2007
Question and Answer IconNeed help?

Do you have a question about the Hunter Seville and is the answer not in the manual?

Hunter Seville Specifications

General IconGeneral
Fan TypeCeiling Fan
Blade Span52 inches
Number of Blades5
Motor Speeds3
Control TypePull Chain
Remote Control IncludedNo
Room SizeLarge Room
Mounting TypeDownrod
FinishBrushed Nickel
WarrantyLimited Lifetime
Finish OptionsBrushed Nickel
Light KitYes

Summary

Safety and Preparation

Cautions and Warnings

Critical safety instructions for installation, electrical shock, injury prevention, and fan control usage.

Installation Readiness

Steps for preparation, tools, accessories, and checking parts before installation.

Installer's Choice Mounting

Details the patented 3-position mounting system for flexible installation options.

Site Preparation

Choosing the Fan Site

Guidelines for selecting an optimal fan location, ensuring blade clearance and structural support.

Existing Fan Site Checklist

Verifying support, ceiling hole, outlet box, and wiring for an existing installation site.

New Site Preparation Steps

Outlines steps for preparing a new site: cutting hole, brace, outlet box, wiring.

Fan Assembly - Site Wiring and Mounting Plate

Site Wiring and Outlet Box Installation

Detailed steps for preparing wiring and installing the outlet box into the ceiling.

Installing the Ceiling Plate

Instructions for drilling holes and attaching the ceiling plate securely to the support structure.

Fan Assembly - Downrod and Hanging

Assembling the Downrod

Procedures for assembling the downrod for both standard and low-profile ceiling fan installations.

Hanging the Fan

Steps for safely hanging the fan assembly onto the installed ceiling plate.

Fan Assembly - Canopy and Wiring

Installing the Canopy

Guides on attaching the canopy and trim ring to cover the ceiling plate and wiring.

Wiring the Fan

Instructions for connecting the fan's electrical wires, including single/dual switch options.

Blade and Canopy Trim Assembly

Assembling the Blades

Steps for attaching fan blades to the blade irons, including grommets and medallions.

Canopy Trim Ring Installation

Instructions for installing and removing the canopy trim ring for a finished look.

Light Fixture and Switch Housing Installation

Attaching Switch Housings

Procedures for attaching the upper and lower switch housings to the fan assembly.

Installing the Light Fixture

Steps for installing the light fixture, including connecting plug connectors.

Glass Bowl and Optional Switch Housing

Installing the Glass Bowl

Steps for installing the glass bowl, including pull chains and finial.

Installing Without Light Fixture

Instructions for installing the optional switch housing when the light fixture is not used.

Wiring Harness and Fan Operation

Wiring Harness Installation

Instructions for installing the wiring harness into the optional switch housing.

Operating Your Ceiling Fan

How to use pull chains for fan/light control and adjust the reversing switch for air flow.

Maintenance and Troubleshooting

Cleaning and Caring for Fan

Guidance on cleaning the fan's finishes and blades to maintain appearance and longevity.

Troubleshooting Common Issues

Solutions for common fan problems like no operation, noise, or excessive wobbling.

Related product manuals