Need help?Do you have a question about the Hunter Staten and is the answer not in the manual?
Examines ceiling angle requirements for standard and angled mounting types.
Provides details on angled mounting, including downrod and kit requirements.
Secures the ceiling bracket using machine screws and washers to the outlet box.
Secures the ceiling bracket using wood screws and washers to the support structure.
Follows steps to install the downrod, including setscrew tightening and wire trimming.
Guides on how to lift and place the fan housing into the ceiling bracket slot.
Connects ceiling wires to fan wires for single-switch operation.
Connects ceiling wires to fan wires for dual-switch operation.
Guides on fitting and securing the canopy using canopy screws.
Secures fan blades to the motor using blade screws and washers.
Details steps for attaching the upper and lower switch housings and securing the light kit.
Instructions for installing bulbs into the fan's light sockets.
Attaches pull chain pendants and explains their function for fan speed and light control.
Explains how to change fan direction (updraft/downdraft) using the reversing switch.
Addresses common problems like fan not working, wobbling, and noisy operation.
Details warranty coverage, service procedures, and exclusions for the ceiling fan.
Provides step-by-step instructions for removing and reassembling the downrod assembly.
To Next Page
General
