14 2. Basic Procedures Operation Instructions for TCX575 Tire Changer
CAUTION: Always make sure the wheel is being rotated while inserting
the automatic lever.
Locate an area with a gap between the tire and wheel.
Press the wheel rotation pedal to rotate the wheel clockwise. While rotating,
insert the automatic lever into the rim / tire assembly.
CAUTION: Always ensure that the automatic lever is inserted in a gap
between the rim and the tire. If the automatic lever is
inserted without a gap, tire damage can occur.
GOOD
BAD
MOUNT HEAD CORRECTLY
PLACED
MOUNT HEAD INCORRECTLY
PLACED
NOTE: If the automatic lever does not completely seat under the
upper bead, continue to rotate until it does.
Press the wheel rotation pedal until the valve location is in the one o'clock
position.
WARNING
THIS CAN DAMAGE THE TIRE
To Next Page
Loading...
