20 2. Basic Procedures Operation Instructions for TCX575 Tire Changer
Difficult Tires
Some of the more difficult tires may have the tendency to “fold” under the lower disc.
TIRE
“FOLDING”
UNDER DISC
If this is the case, reposition the lower disc. While supporting the opposite side of the
tire, again, raise the lower disc until it is just above the rim edge. Create a gap
between the rim edge and the tire.
Temporarily unlock the lower disc lock lever and pull the lower disc in between the
rim edge and the tire. Then lock the lower disc in place.
DISC
REPOSITIONED
ND LOCKED IN
PLACE
With the tire in position, press the wheel rotation pedal to rotate the wheel
clockwise and demount the bottom bead.
Alternate Procedure
Using the Bead Lever
NOTE: Clean the mount/demount head to remove dirt and debris
before demounting the tire from the rim.
Press the wheel rotation pedal until the valve location is in the one o'clock
position.
Position the mount/demount head against the outer edge of the upper rim lip.
To Next Page
Loading...
