Operation Instructions for TCX575 Tire Changer 2. Basic Procedures 23
Position tire on top of the rim and tilt tire forward. Move the mount / demount head
into “working” position by pressing the column rotation pedal .
Lower the mount / demount head into position on the edge of the rim and lock it into
place.
Rotate the assembly clockwise until the lower bead drops into the drop center of the
rim.
NOTE: When mounting the top bead, it is important to get the
correct positioning of the tire on the mount / demount head.
MOUNT HEAD CORRECTLY PLACED MOUNT HEAD INCORRECTLY PLACED
To Next Page
Loading...
