How do I insert the rechargeable battery wand into HunterDouglas Window Blinds?
To properly insert the rechargeable battery wand into your HunterDouglas Window Blinds, match the direction of the arrow on the underside of the battery wand with the arrow on the battery mount. Then, insert the nose of the battery wand into the cavity of the battery mount.
How to replace batteries in HunterDouglas Window Blinds battery wand?
To replace the batteries, squeeze the cap latch to release and remove the cap from the battery wand. Install the batteries according to the instructions on the battery wand label. Then, press the cap on until it latches. Hunter Douglas recommends using AA alkaline batteries for optimal performance.
How to fix HunterDouglas Window Blinds that are not vertically aligned?
Ensure that the installation brackets are level and aligned. Shim the installation brackets to level the headrail if needed. Check that the headrail is completely inserted into the installation brackets. You can also adjust the screws on the moving rail bracket.
Why don't my adjacent HunterDouglas Indoor Furnishing shades stack evenly?
If adjacent HunterDouglas Indoor Furnishing shades do not stack evenly, and one shade is stacking tighter than the other, it may have been reset. Try lowering and raising the shades to loosen the stack. The shade stack on both shades should be within 5/8" of each other.
What to do if HunterDouglas Window Blinds shade stops before bottom rail?
If your HunterDouglas Window Blinds shade stops before hitting the bottom rail, adjust the tension brackets so that the tension cables are parallel to the side rails. Also, verify that the side rails are installed in the correct orientation and reset the travel limits.
How to fix HunterDouglas Indoor Furnishing battery-powered shade when it doesn't operate using the manual control button?
If your HunterDouglas Indoor Furnishing battery-powered shade isn't working with the manual control button, start by checking the batteries in the battery wand(s). Make sure they are new or fresh, and replace them if needed. Also, ensure that all cable connections between the power cable from the shade and the battery wand(s) are securely connected.
What to do if HunterDouglas Indoor Furnishing shade does not raise and lower evenly?
If your HunterDouglas Indoor Furnishing shade doesn't raise and lower evenly, check the installation brackets. Also, ensure that the shade fabric is not caught between the bracket tab and the headrail.
Why HunterDouglas Duette Indoor Furnishing shade will not snap into the mounting brackets?
If your HunterDouglas Indoor Furnishing shade won't snap into the mounting brackets, make sure the mounting brackets are level. You may also need to loosen the tab screws slightly.
Why is my HunterDouglas Indoor Furnishing shade operating slowly?
If your HunterDouglas Indoor Furnishing shade is operating slowly, try replacing the batteries in the battery wand(s). Also, keep in mind that larger shades use a different internal gear box, which may cause them to move at half the speed of smaller shades.
Why HunterDouglas Duette Indoor Furnishing shade raises or lowers unevenly?
If your HunterDouglas Indoor Furnishing shade raises or lowers unevenly, or the bottom rail is uneven when fully raised, start by checking that the headrail and installation brackets are level and aligned, using shims if necessary. Also, check for any obstructions in the shade's path that may cause misalignment when lowering. Try lowering the shade completely and then raising it to allow it to self-correct. If the issue persists, you may need to adjust the shade.
General| Brand | HunterDouglas |
|---|---|
| Installation | Inside mount, outside mount |
| Material | Fabric |
| Light Control | Varies from sheer to opaque |
| Operating Systems | PowerView Automation |
| Specialty Shapes | Yes |
| Style | Modern |
| UV Protection | Up to 99% |
| Light Control Options | Sheer, semi-sheer, semi-opaque, opaque |
| Operation | Manual or motorized |
| Customization | Fabric, Color, Opacity, Operating System |
| Energy Efficiency | Excellent; cellular design traps air for insulation |
To Next Page