HunterDouglas Luxaflex PowerView User Manual

5. Set a favourite position
5.1 Select the blind channel
5.2
Use the  open ,  stop and  close buttons to
move the blind to the desired favourite position. Use
the  arrow up and  arrow down buttons to ne-
tune.
5.3
Press and hold the  stop button for 6 seconds.
DO NOT select a group on the remote!
Keep pressing until the remote lights start
blinking
IMPORTANT
Watch out to perform steps 4.4 and 4.5 within 3 seconds!

MANUAL
Page 10 of 23 version: 1.0

HunterDouglas Luxaflex PowerView Specifications

General

Brand	HunterDouglas
Model	Luxaflex PowerView
Category	Window Blinds
Language	English