HunterDouglas Luxaflex PowerView User Manual

3. Getting started
3.1 Pairing a remote
A PowerView® remote can control up to 6 individual groups of blinds (buttons 1 to 6 at the top of the remote). The
instructions below assign the blind to group 1.
blinking CHARGE (normal)
constant Fully Charged
ashing CHARGE not allowed (temperature to high)
Alternately CHARGE NTC ERROR (open/short circuit)
3.1 Locate the manual control button on your blind.
3.2
Press and hold the  stop button for 6 seconds.
Keep pressing until the remote lights start
blinking
MANUAL
Page 5 of 23 version: 1.0

HunterDouglas Luxaflex PowerView Specifications

General

Brand	HunterDouglas
Model	Luxaflex PowerView
Category	Window Blinds
Language	English