HunterDouglas Luxaflex PowerView User Manual

7. Additional actions
7.1. End limits reset (factory default)
This procedure will erase all limits stored in the volatile motor memory. It will not clear the Network ID and Group
assignments.
6.2.10 The new bottom limit is set!
Note
This procedure can be skipped for a fresh out of the box motor.
The motor will jog 2x when receiving any PowerView® command (e.g. Pressing the manual control button on the motor),
to conrm no limits are set.

MANUAL
Page 18 of 23 version: 1.0

HunterDouglas Luxaflex PowerView Specifications

General

Brand	HunterDouglas
Model	Luxaflex PowerView
Category	Window Blinds
Language	English