HunterDouglas Luxaflex PowerView User Manual

6.2.3 Release the manual control button .
The motor LED turns red to acknowledge the
motor is in program mode
6.2.4
Use the  open ,  stop and  close buttons to
move the blind to the new bottom position. Use the 
arrow up and  arrow down buttons to ne-tune.
6.2.5
Press and hold the  stop button for 6 seconds.
DO NOT select a group on the remote!
Keep pressing until the remote lights start
blinking
IMPORTANT
Watch out to perform steps 5.2.6 and 5.2.7 within 3 seconds!

MANUAL
Page 16 of 23 version: 1.0

HunterDouglas Luxaflex PowerView Specifications

General

Brand	HunterDouglas
Model	Luxaflex PowerView
Category	Window Blinds
Language	English