OPERATION
13
Split Stack Blind Operation
PermaTilt
®
Wand Control
NOTE: Cord length and/or tension cannot be adjusted for PermaTilt
®
Wand Control System. It
is set in the factory to help ensure that the product meets cord safety standards.
■ Tilting. (gray arrows) When tilting your vanes use one hand
to hold the tether to keep it from moving, while turning
the wand handle with your other hand. This prevents the
tensioned cord from twisting.
■ Traversing. (black arrows) When traversing your vanes use
one hand to hold the tether to keep it from moving, while
pulling the tensioned cord up or down with your other hand.
NOTE: Do not over torque the wand. It can cause the
vanes to kick out at the bottom of the blind.
Cord and Chain Operated
■ Use the pull cords attached to the cord tensioner to open and
close the blind (black arrows).
■ Use the tassels and chains to rotate the vanes open or closed
(gray arrows).
Tether
To Next Page
Loading...
