HunterDouglas Platinum - Getting Started with Your Remote; Powering Up the Remote; Resetting the Remote Control

Getting Started
Using the power of Platinum
™
Technology is easy. In just
two simple steps, your remote is ready.
POWER UP
Remove the battery
compartment cover on
the back of the remote
control. Insert two AAA
alkaline batteries as
diagrammed inside the
battery compartment.
RESET BUTTON
Use a paper clip to press
and quickly release the
MASTER RESET button
located next to the
batteries. Replace the
battery compartment
cover. You are now
ready to begin.
1
hunterdouglas.com 3
2
PROGRAM
BUTTON
MASTER
RESET
BUTTON
BATTERY
COMPARTMENT