LabScan XE Supplemental Manual for EasyMatch QC
6
The lights shown here are (L-R): Power on, Small Area View In-Use, UV completely-excluded, and In-
Progress.
Macro Button
The macro button, also known as the Sensor button, activates a sample measurement.
LabScan XE Accessories
The following accessories are provided with the LabScan XE system and can be found in the standards
case:
• Instrument Standard White tile with calibrated values - placed at the sample port during
standardization.
• Black glass - placed at the sample port during standardization.
• Diagnostic Check Green tile - used to check instrument performance.
• White backup tile - used to back samples during measurement or cover the port when the
instrument is not in use.
• Tile data sheet - Gives calibration information for the standard tiles.
• Fuses - Two fuses are provided as spares.
• Communications cable.
• Power cord.
• Standards care card - gives instructions on how to clean the standards.
• Certificate of traceability for the calibrated white tile.
LabScan XE Options and Sample Devices
There are many options and devices available for positioning samples at the measurement ports of the
LabScan XE and for making the instrument easier to use. For the latest information, please refer to
https://support.hunterlab.com/hc/en-us/articles/218375923-Accessories-for-HunterLab-
Instruments.
To Next Page
Loading...
