English - 13
Pos. Description Used for Order No.
1 Air gap tool, ignition Setting ignition module 502 51 34-02
2 Piston stop Locking the crank shaft 575 29 36-01
3 Wrench Clutch out or in 513 63 60-01
4 Mandrel Dismantling the flywheel 502 51 94-01
5 Rod assy Piston pin out or in 521 53 35-01
6 Wrench Clutch spring in 513 63 65-01
7 Guide Brake spring out or in 513 63 70-01
8 Flywheel tool Remove the flywheel 504 91 08-03
9 Tachometer Engine speed meter 502 71 14-01
10 Torx wrench T20/T25/T27 578 28 90-01
11 Ignition checker Spark strength check 501 97 64-01
12 Spark plug adapter Pressure testing 503 84 40-03
13 Rubber wedge, outlet Pressure testing 502 54 11-02
14 Pressure/vacuum gauge Pressure testing 531 03 06-23
15 Assembly fixture Securing the chain saw 502 51 02-01
16 Hook for fuel filter Withdrawing the fuel filter 502 50 83-01
17 Assembly kit, piston Assembling the piston 502 50 70-01
18 Adjustment screwdriver Adjustment of the carburettor 513 63 56-01
19 Adjustment screwdriver Adjustment of the carburettor 530 03 55-60
Service tools
15 16
17
18
19
The tools listed here are
the service tools required
for this model of chain saw.
In addition to these tools, a
normal kit of hand tools is
required.
To Next Page
Loading...
