English - 25
Safety equipment
3
Cleaning and inspection
• Carefully clean and check all parts. See figure
19. Parts must be replaced if cracked or show
signs of other defects. Always use original
spare parts.
• Check that the spring is intact and retains all its
tension.
Fig 19
6.10 Assembling the throttle lockout,
throttle control and spring
1
Assemble the throttle lockout, the throttle control
and the spring according to the instructions given
in chapter 6.9 in reveresed order. Carefully fit the
spring to the throttle lockout and the throttle control
as outlined in figure 18.
To Next Page
Loading...
