Husqvarna 540i XP - Technical Data; Performance Specifications; Noise, Vibration, and Dimensions

Technical data
Technical data
540i XP 540i XPG
Motor
Type BLDC (brushless) 36V BLDC (brushless) 36V
Features
Low energy mode savE savE
Lubrication system
Type of oil pump Adjustable Adjustable
Oil tank capacity, liter/cm
2
0.18/180 0.18/180
Weight
Chainsaw without battery, guide bar, saw chain and emp-
ty chain oil tank, kg
2.9 3.1
Water protection level
IPX4 Yes Yes
Noise emissions
2
Sound power level, measured dB(A) 102 102
Sound power level, guaranteed L
WA
dB(A) 104 104
Sound levels
3
Sound pressure level at the operator's ear, measured
according to EN 62841-1
95 95
Vibration levels
4
Front handle m/s
2
3.6 3.6
Rear handle m/s
2
3.7 3.7
Saw chain/guide bar
Recommended bar lengths, inch/cm 12–16/30–40 12–16/30–40
Usable cutting length, inch/cm 11–15/28–38 11–15/28–38
Type of drive sprocket/number of teeth m0.325"/7 (SP21G) m0.325"/7 (SP21G)
2
Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive
2000/14/EC.
3
Reported data for sound pressure level for the machine has a typical statistical dispersion (standard deviation)
of 3 dB (A).
4
Vibration level, according to EN 62841-4-1. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 1 m/s
2
. Declared vibration data from measurements when the machine is fitted with a
bar length and recommended chain type. If the machine is fitted with a different bar length, the vibration level
may vary by max ± 1.5 m/s
2
.
1065 - 010 - 08.02.2024 35