English - 39
CONTROL PANEL
5.3 Main switch
Set the main switch in the 1 position to start the robotic
lawnmower.
Set the main switch in the 0 position when the robotic
lawnmower is not in use or work is being carried out on
the blade disc.
When the main switch is set in the 0 position the motors
on the robotic lawnmower cannot start.
5.4 The charging station’s PARK
button
This section does not apply to Automower® 320.
The PARK button on the charging station is used to call
the robotic lawnmower back to the charging station. The
PARK button on the keypad in the robotic lawnmower
offers the same function. The PARK button on the
charging station is useful for instance when the robotic
lawnmower operates in a large working area and the
charging station is more accessible.
An LED in the PARK button is lit solid when the button has
been pressed. The LED diode goes out when the robotic
lawnmower is parked in the charging station.
The robotic lawnmower remains parked in the charging
station until the START button on the robotic lawnmower’s
keypad is pressed.
3012-1060
3012-1215
To Next Page
Loading...
