Husqvarna AUTOMOWER 430X - 1 Introduction; Document Description; Servicing Tools; Technical Data

1 Introduction
1.1 Document description
The Workshop manual is intended for dealers and
service personnel, and is a supplement to the Operator’s
Manual. The following system is used in Workshop
manual to make it easier to use:
• Text written in italics is a text that is shown on the
display or in the menus in the Autocheck service
program.
• Text written in bold is one of the buttons on the
keypad of the product or a button on Autocheck
service program.
• Text written in UPPERCASE and italics refer to the
position of the main switch and the different
operating modes available in the product.
1.2 Servicing tools
Always use original tools recommended by the
manufacturer.
1.3 Technical data
For the technical data, refer to Operator's manual and
the manufacturer's website.
1191 - 001 - Introduction - 3