Husqvarna AUTOMOWER 440 Workshop Manual

1 Introduction
1.1 Document description
The Workshop manual is intended for dealers and
service personnel, and is a supplement to the Operator’s
Manual. The following system is used in Workshop
manual to make it easier to use:
• Text written in italics is a text that is shown on the
display or in the menus in the Autocheck service
program.
• Text written in bold is one of the buttons on the
keypad of the product or a button on Autocheck
service program.
• Text written in UPPERCASE and italics refer to the
position of the main switch and the different
operating modes available in the product.
1.2 Servicing tools
Always use original tools recommended by the
manufacturer.
1.3 Technical data
For the technical data, refer to Operator's manual and
the manufacturer's website.
1191 - 001 - Introduction - 3

Husqvarna AUTOMOWER 440 Specifications

General

Cutting Width	24 cm
Cutting Height Min	20 mm
Cutting Height Max	60 mm
Battery Type	Li-ion
Typical Mow Time on One Charge	290 min
Sound Level	56 dB(A)
Area Capacity	4000 m²
Weather Resistance	Yes
Blade Type	Pivoting razor blades
Product Size	72 × 56 × 31 cm