What to do if combination instrument values are deleted on my Husqvarna FE 501 EU 2021 Motorcycle?
If the combination instrument values (time, stop watch, lap times) are deleted on your Husqvarna Motorcycle, it means that the combination instrument battery is empty. You should change the battery.
General| Brand | Husqvarna |
|---|---|
| Model | FE 501 EU 2021 |
| Category | Motorcycle |
| Language | English |
Defines the intended use for different models and versions of the vehicle for safe operation.
Emphasizes reading and following all safety instructions for user protection.
Defines risk levels (Danger, Warning, Caution, Note) and their corresponding symbols for clarity.
Provides critical instructions for safe operation, including rider fitness and impairment.
Stresses the importance of wearing appropriate protective clothing for rider safety.
Explains warranty conditions and the requirement for authorized workshop service to maintain it.
Stresses the importance of proper service for optimal operation and to prevent premature wear.
Explains the clutch lever's location and hydraulic operation for gear engagement.
Identifies the hand brake lever and its function for activating the front brake.
Locates the throttle grip on the right handlebar for controlling engine speed.
Details the switch-off button's location and function for stopping the engine safely.
Describes the emergency OFF switch positions for ignition control in urgent situations.
Locates the start button and its function for actuating the starter motor.
Explains the combination switch for selecting engine mappings and traction control modes.
Describes the function of various indicator lamps on the dashboard for status monitoring.
Details indicator lamps specific to FE US models for status monitoring.
Provides step-by-step instructions for locking the steering to prevent theft.
Provides step-by-step instructions for unlocking the steering to enable riding.
Guides on setting units (KM/H or M/H) and other display options for user preference.
Details how to view and reset speed, time, and trip distance (DST) for tracking rides.
Explains how to view and reset the second trip distance (DST2) for additional tracking.
Describes how to view average speed, operating hours, and total distance for performance monitoring.
Provides essential safety warnings and checks before the initial ride for safe operation.
Explains the engine break-in procedure and performance limits for optimal engine life.
Advises on preparing the vehicle for challenging conditions like sand or mud for optimal performance.
Details specific steps for preparing the bike for dry sand riding to ensure proper function.
Outlines preparations for riding on wet sand conditions to maintain performance.
Provides guidance for preparing the vehicle for wet and muddy conditions to ensure reliability.
Explains how to prepare for high temperatures or slow riding to prevent overheating.
Details preparations for riding in cold temperatures or snow to ensure proper function.
Lists critical checks and maintenance steps before every ride for safety and readiness.
Provides instructions on how to safely start the motorcycle's engine.
Explains how to activate and use the traction control system for improved grip.
Explains the process of shifting gears and general riding techniques for efficient control.
Provides instructions and warnings on effective and safe braking techniques.
Provides instructions and safety precautions for refueling the vehicle.
Lists essential maintenance tasks based on operating hours for vehicle upkeep.
Lists recommended maintenance tasks at specific intervals for preventative care.
Guides on checking and adjusting the basic chassis settings based on rider weight.
Details how to adjust the low-speed compression damping for rider comfort.
Details how to adjust the high-speed compression damping for improved suspension response.
Explains how to adjust the rebound damping of the shock absorber for better control.
Guides on checking the static sag of the rear shock absorber for proper setup.
Details how to check the riding sag of the rear shock absorber for optimal performance.
Explains how to adjust the spring preload of the shock absorber for rider comfort.
Guides on adjusting the riding sag, including spring rate selection for optimal handling.
Details how to adjust the fork's compression damping for improved ride quality.
Details how to check the front brake fluid level for system readiness.
Explains how to check the front brake linings for wear and damage.
Guides on how to change the front brake linings, including safety.
Details how to check the rear brake fluid level for system readiness.
Explains how to check rear brake linings for wear and damage.
Guides on how to change rear brake linings for safe braking.
Guides on checking the antifreeze and coolant levels for engine health.
Details how to check the coolant level in the radiator for engine health.
Explains how to check the engine oil level at different temperatures for engine health.
Details the process for changing engine oil, filter, and cleaning screens.
Provides comprehensive steps for preparing the motorcycle for long-term storage.
Lists possible causes and actions for starter motor issues.
Lists possible causes and actions when the engine cranks but doesn't start.
Lists possible causes and actions when the engine fails to accelerate.
Lists possible causes and actions for low engine power.
Lists possible causes and actions when the engine stops while riding.
Lists possible causes and actions for engine overheating.
Lists possible causes and actions for malfunction lamp warnings.
Lists possible causes and actions for high engine oil consumption.
Lists possible causes and actions for a discharged 12-V battery.
Lists blink codes, their meanings, and error level conditions.
Continues the list of blink codes and their associated error conditions.
Lists detailed engine specifications such as displacement, bore, stroke, and valve data.
Lists essential tightening torques for engine components for correct assembly.
Lists chassis tightening torques for various components for correct assembly.
To Next Page