Husqvarna P 520D With cabin - Technical Data; Engine and Electrical Specifications

English – 49
TECHNICAL DATA
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the
engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power
output for the engine installed on the final machine will depend on the operating speed, environmental conditions and other values.
P 520D P 525D
Dimensions
Unladen weight excluding cutting unit, kg/lb 857/1889,3 907/1999,6
Tyre dimensions 18 x 8,5 x 8 20x10x10
Air pressure, rear - front, kPa / bar / PSI 150/1,5/22 150/1,5/22
Engine
Brand / Model Kubota D902 Kubota D1105
Nominal engine output, kW (see note 1) 14,5 @3000 rpm 18,7 @3000 rpm
Displacement, cm
3
/cu.in 898 / 54.8 1123 / 68.5
Idle speed, rpm 1800 ± 50 1750 ± 50
Max. engine speed, rpm 3300 3200
Fuel, diesel fuel
min 45 cetane 2.0-4.5 cSt @ 40°C
0.835-0.855 kg/l sulphur<0.2w%
min 45 cetane 2.0-4.5 cSt @ 40°C
0.835-0.855 kg/l sulphur<0.2w%
Tank volume, litres/USqt 25 / 6.6 25 / 6.6
Oil, API class CD or better SAE 10W/40 SAE 10W/40
Oil volume incl. filter 3,3/3,5 3,3/3,5
Oil volume excl. filter, litres/USqt 3,0/3,2 3,0/3,2
Starting Electric starter Electric starter
Electrical system
Type 12 V, negative earthed 12 V, negative earthed
Battery 12 V, 62 Ah 12 V, 62 Ah
Main fuse, A 125 125
Supply fuse circuit board, A 50 50
Lights
Low beam H7 H7
Parking lights W5W W5W
Turning lights PY21W PY21W
Headlights H9 H9
Taillights LED lights LED lights
Rotating warning light LED lights LED lights
Cooling system
Cooling system capacity, l/USqt 3,7/3,9 3,7/3,9
Antifreeze ≥ 50% propylenglykol (MPG) ≥ 50% propylenglykol (MPG)
Hydraulic System
Max. working pressure, bar / psi 120 / 1740 120 / 1740
Max. workflow l/min / USgal/min 12 / 3,17 12 / 3,17
Hydraulic tank capacity, l/USqt 8/8,5 8/8,5
Hydraulic system capacity, l/USqt 13/13,7 13/13,7
Transmission
Brand Kanzaki KTM 23 Kanzaki KTM 23
Oil, class API SM, ACEA A3/B4 SAE 10W/50 Synthetic SAE 10W/50 Synthetic
Oil capacity gearbox front, l/USgal 0,9 / 0.24 0,9 / 0.24
Oil capacity gearbox rear, I/USgal 0,9 / 0.24 0,9 / 0.24
Max. hydraulic pressure, bar/psi 275/3989 275/3989
Drive
Forward speed, km/h. 0-15 0-18,5
Reverse speed, km/h 0-12 0-14