Husqvarna P02138HV - Transportation; Storage; Technical data

Transportation
• Put the transportation guard on the cutting
attachment during transportation to prevent
injuries.
• Make sure that the product can not move
during transportation.
Storage
• Always put the product away safely when
not in operation. Leakages and fumes from
the product can touch sparks, naked
flames from electrical equipment, electrical
mowers, relays/switches, boilers and more.
• Always save fuel in an approved container.
• Empty the fuel tank and the chain oil tank
when the product is in storage for longer
periods of time. Discard used fluids
correctly.
• Put the transportation guard on the cutting
attachment during storage to prevent
injuries.
• Remove the spark plug cap from the spark
plug and engage the chain brake before
storage.
Technical data
unit
120e Mark II
(P02138HV)
Engine specifications
Cylinder displacement cm
3
38
Spark plug
Champion
RCJ7Y
Electrode gap mm (in) 0,5 (0.02)
Fuel tank volume cm
3
300
Idle speed min
-1
2800-3200
Power output at 9000 min
-1
kW 1,4
Emission durability period h 125
Noise and vibration data
Equivalent vibration levels, a
hveq
front handle
1
m/s
2
5,3
Equivalent vibration levels, a
hveq
rear handle
2
m/s
2
6,7
1
Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted en-
ergy total for vibration levels under various working conditions. Reported data for equiva-
lent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s
2
.
2
Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted en-
ergy total for vibration levels under various working conditions. Reported data for equiva-
lent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s
2
.
653 - 006 - 10.02.2020 31