Husqvarna P524 EFI - To Do a Check of the Engine Speed; To Do a Last Inspection

4.6 To do a check of the engine speed
1. Do a check of the engine speed with a Husqvarna
tachometer.
2. Make sure that the maximum speed is correct. Refer
to Technical data on page 84 .
4.7 To do a last inspection
• Do a check of the oil level in the hydraulic tank and
fill if it is necessary.
• Make sure that there are no leaks.
• Make sure that the product is clean.
10 - Assembly 662 - 001 - 23.10.2018