13 Technical data
13.1 Technical data
P524 EFI
Dimensions, refer also to
Product dimensions on page 86
Length without cutting deck, mm 2058
Weight without cutting deck, with empty tanks, kg 432
Tire dimensions 18×8.50×8
Tire pressure, rear – front, kPa / bar / PSI 100 / 1.0 / 14.5
Max. gradient, degrees ° 10
Engine
Brand / Model Kawasaki / V-Twin, FX730V EFI-
KME01609-C1
Nominal engine output, kW
1
15.6
Displacement, cm
3
726
Max. engine speed, rpm 3000 +/- 75
Max. speed forward, km/h 13
Fuel, min. octane grade lead-free 95 (max. methanol 5%, max. ethanol 10%,
max. MTBE 15%)
Tank volume, l 22
Oil, API class CD or better SAE 10W/40
Oil volume incl. filter, l 2.1
Oil volume excl. filter, l 1.8
Start motor Electric start 12V
Transmission
Brand / Model Kanzaki / KTM 23
Oil, class API SM, ACEA A3/B4 SAE 10W/50 Synthetic
Oil capacity gearbox front, l 0.9
Oil capacity gearbox rear, l 0.9
Hydraulic system
Max. working pressure, bar/psi 120/1740
Hydraulic tank capacity, l 8
Hydraulic system capacity, l 13
Oil, API class SM or better SAE 10W/50 Synthetic
Electrical system
Type 12V, negative earthed
Battery 12V, 24Ah
Spark plug NGK BPR4ES
Main fuse, flat pin type, A 20
1
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production en-
gine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from
this value. Actual power output for the engine installed on the final product will depend on the operating speed,
environmental conditions and other values.
84 - Technical data 662 - 001 - 23.10.2018
To Next Page
Loading...
