6.9 To lubricate the seat slides
1. Tilt the seat forward.
2. Lubricate the seat slides with engine oil.
6.10 To lubricate the hydrostatic
transmission cable
1. Lubricate the joints and bearings of the hydrostatic
transmission cable with engine oil.
2. Remove the rubber sleeve and lubricate the
hydrostatic transmission cable with engine oil.
3. Press the forward drive pedal 5 times and lubricate
the hydrostatic transmission cable again.
4. Attach the rubber sleeve.
6.11 To lubricate the steering cylinder
The steering cylinder has 2 grease nipples, one on each
end.
• Lubricate with a grease gun until grease comes out.
6.12 To lubricate the joint bearing
1. Lubricate the joint bearing of the articulation with a
grease gun until grease comes out.
6.13 To lubricate the link rod
1. There are 2 grease nipples, one on each side of the
link rod. Lubricate with a grease gun until grease
comes out.
662 - 001 - 23.10.2018 Servicing - 17
To Next Page
Loading...
