Cutting height.
Servicing position.
The blades are engaged.
The blades are disengaged.
Oil level.
Stop the engine and remove the spark plug cable before
repairs or maintenance.
Do a check of the engine oil level.
Do a check of the engine oil level.
Parking brake.
Push in the PTO button.
Do not use the safety belt if the
ROPS is disengaged.
Always use the safety belt when
the ROPS is engaged.
Note: Other symbols/decals on the product refer to
certification requirements for some commercial areas.
6 - Safety 662 - 001 - 23.10.2018
To Next Page
Loading...
