Why does my Husqvarna SVARTPILEN 401 engine only turn when the clutch lever is drawn?
If the Husqvarna Motorcycle engine turns only when the clutch lever is drawn, the vehicle might be in gear, so shift the transmission into neutral. Another possible cause is that the vehicle is in gear and the side stand is folded out, in this case shift the transmission into neutral.
Why are the headlight and position light not functioning on my Husqvarna SVARTPILEN 401?
If the headlight and position light on your Husqvarna Motorcycle are not working, fuse 6 might be blown, so change the fuses of individual power consumers.
Why are the turn signal, brake light, and horn not functional on my Husqvarna SVARTPILEN 401 Motorcycle?
If the turn signal, brake light, and horn on your Husqvarna Motorcycle are not functional, fuse 4 or 6 might be blown, so change the fuses of individual power consumers.
General| Displacement | 373.2 cc |
|---|---|
| Torque | 37 Nm @ 7, 000 rpm |
| Transmission | 6-speed |
| Cooling | Liquid cooled |
| Fuel Tank Capacity | 9.5 liters |
| Seat Height | 835 mm |
| Fuel System | Electronic Fuel Injection |
| Front Suspension | WP APEX 43 |
| Rear Suspension | WP APEX Monoshock |
| Bore x Stroke | 89 mm x 60 mm |
| Compression Ratio | 12.6:1 |
| Starter | Electric |
| Final Drive | Chain |
| Ground Clearance | 145 mm |
| Engine Type | Single cylinder, 4-stroke |
| Power | 32 kW |
| Front Brake | 320 mm disc |
| Rear Brake | 230 mm disc, single-piston caliper |
| ABS | Bosch 9.1MB |
| Wheelbase | 1357 mm |
Explains the meaning of various symbols used in the manual.
Explains the typographical formats used in the document.
Defines intended use and describes dangers of misuse.
Explains hazard symbols (Danger, Warning, Caution, Note) and their meanings.
Covers safety precautions for riding, including dangers of accidents and poisoning.
Stresses the importance of wearing appropriate protective clothing for riding.
Conditions for warranty validity and coverage.
Guidelines for using fuel and auxiliary substances, including environmental hazards.
Importance of regular service, care, and tuning for vehicle longevity.
Illustrates the front-left view of the motorcycle with numbered parts.
Illustrates the rear-right view of the motorcycle with numbered parts.
Explains where to find the Vehicle Identification Number (VIN).
Explains the location of the USA and Canada type labels.
Details how to find and use the key number for ordering spare keys.
Indicates the location of the engine number.
Describes clutch lever, hand brake lever, throttle grip, and handlebar switches.
Describes the ignition and steering lock functions and states.
Details the procedure for opening and closing the fuel tank filler cap.
Explains the location and function of the side stand, including safety system coupling.
Describes how the instrument activates and performs its self-test.
Describes the various areas and information shown on the instrument display.
Details how to change ABS modes (Road, Supermoto) and their functions.
Explains how to set the RPM for the shift warning lights.
General advice and warnings before riding the motorcycle for the first time.
Guidelines for the engine's break-in period, including speed limits.
Warnings and guidelines regarding vehicle weight limits and luggage.
Pre-ride checks covering fluids, brakes, tires, and controls.
Steps and safety precautions for starting the engine and moving off.
Detailed instructions and warnings on how to apply the brakes effectively.
Instructions and safety precautions for stopping and parking the motorcycle.
Instructions and safety warnings related to refueling the motorcycle.
Lists mandatory maintenance tasks at specified intervals.
Lists recommended maintenance tasks at specified intervals.
Explains how to adjust the fork's compression and rebound damping.
Explains how to adjust the shock absorber's rebound damping and spring preload.
Describes handlebar mounting options for rider comfort and adjustment.
Instructions for lifting and removing the motorcycle from lifting gear.
Steps for removing and installing passenger seat and bag carrier.
Detailed steps for removing and installing the left and right side covers.
How to check and clean the drive chain and adjust its tension.
Instructions for installing the license plate bracket.
Explains the function and components of the ABS system.
How to check front and rear brake fluid levels and associated warnings.
How to check the thickness and condition of front and rear brake linings.
How to check and adjust the free travel of the rear brake lever.
Step-by-step guides for removing and installing the front wheel.
Step-by-step guides for removing and installing the rear wheel.
How to check tires for damage, tread depth, age, and pressure.
Instructions for removing, installing, and charging the 12-V battery.
Steps for changing the main fuse and ABS fuses.
How to check and adjust the motorcycle's headlight setting and range.
How to check coolant level and antifreeze protection.
Instructions for draining, filling, and bleeding the cooling system.
Steps for changing the coolant, including safety warnings.
How to check and adjust the free play in the clutch lever.
How to check and adjust the basic position of the shift lever.
How to correctly check the engine oil level.
Step-by-step guide for changing engine oil, filter, and cleaning screens.
Instructions for adding engine oil, including recommended type and quantity.
Guidelines and warnings for cleaning the motorcycle safely and effectively.
Recommendations for preparing the motorcycle for winter storage.
Steps to follow for storing the motorcycle for extended periods.
Steps to take before riding the motorcycle after it has been stored.
Lists common engine and electrical faults, causes, and actions.
Troubleshooting steps for performance issues and warning lamp indicators.
Specifications related to the motorcycle's engine.
Specifications related to the motorcycle's chassis, suspension, and brakes.
Torque values for chassis and engine fasteners.
Standard classification and guidelines for brake fluid and coolant.
Standard classification and recommended suppliers for engine oil.
Standard classification and guidelines for fork and shock absorber fluids.
Fuel specifications and warnings about ethanol/methanol content.
Recommended suppliers and products for chain cleaning and fuel stabilization.
Recommended suppliers and products for motorcycle cleaning and lubrication.
Explanations of JASO T903 MA2 and SAE standards for oils.
Explanation of yellow/orange (error) and green/blue (information) symbols.
To Next Page