Husqvarna T425 - Dismantling the Throttle Lockout, Throttle and Spring

English - 23
Safety equipment
2
Loosen the choke.
3
Lift out the carburettor with a pair of fl at nosed pliers.
4
Pull the throttle actuator rod to the right with a
screwdriver. Rotate the carburettor downwards
half a revolution.
6.9 Dismantling the throttle lockout,
throttle and spring
1
Unscrew the air fi lter housing and air fi lter holder.
Dismantle the handle part by loosening screw A.
Remove the throttle lockout B.
Fig 28
Fig 30
Fig 27
Fig 29