Why does my Husqvarna Chainsaw have too rich acceleration?
If your Husqvarna chainsaw has too rich acceleration, it could be due to: * A blocked air filter. Clean or replace the air filter. * A faulty pump diaphragm. Replace the pump diaphragm. * A faulty diffuser jet. Replace the faulty diffuser jet.
General| Engine Power | 2.4 kW |
|---|---|
| Weight (excl. cutting equipment) | 3.9 kg |
| Sound Pressure Level | 104 dB(A) |
| Sound Power Level | 116 dB(A) |
| Maximum Power Speed | 10, 200 rpm |
| Fuel Tank Volume | 0.35 L |
| Chain Pitch | 3/8" |
| Recommended Bar Length | 14-16 inches |
| Chain Gauge | 0.05 in |
| Bar Length Range | 12-16 inches |
Explains symbols found directly on the chainsaw for operational safety and compliance.
Details symbols used within the operator's manual to convey specific instructions or warnings.
Welcomes the customer and introduces the Husqvarna product, highlighting brand history and quality.
Identifies and labels all major components and parts of the Husqvarna T540 XP chainsaw.
Essential checks and reading requirements before operating a new chainsaw for the first time.
Advises users to exercise caution, avoid unsafe situations, and seek expert advice when uncertain.
Details the mandatory personal protective equipment (PPE) required for safe chainsaw operation.
Explains the function of the chainsaw's built-in safety features and the importance of their maintenance.
Explains the operation and importance of the chain brake and front hand guard for preventing kickback injuries.
Describes the throttle lockout mechanism designed to prevent accidental throttle control activation.
Explains the function of the chain catcher in retaining a broken or jumped chain.
Details the vibration damping system for reducing operator fatigue and improving comfort during use.
Instructions on using the stop switch to safely turn off the engine.
Information on the muffler's function, maintenance, and safety considerations regarding heat and sparks.
Guidance on choosing and maintaining cutting equipment to reduce kickback risk and ensure performance.
Information on using specific cutting equipment to minimize the risk and effects of kickback.
Discusses guide bar specifications and their role in reducing kickback.
Explains saw chain types and their importance in kickback prevention and safety.
Detailed instructions on how to properly sharpen the chain and adjust the depth gauge for optimal performance and safety.
Step-by-step guide on sharpening the cutting teeth of the saw chain for efficient cutting.
Provides general advice and best practices for setting the depth gauge for optimal cutting performance.
Specific instructions and warnings for adjusting the depth gauge setting on the saw chain.
Explains the procedure for correctly tensioning the saw chain to prevent it from jumping off.
Details the importance of lubricating cutting equipment and the correct chain oil to use.
Instructions on how to fill the chain oil tank and considerations for oil selection.
How to check if the chain lubrication system is functioning correctly.
Guidance on checking the wear and condition of the chain drive sprocket.
Procedures for inspecting the saw chain and bar for wear and damage.
Instructions for checking the guide bar for wear, burrs, and damage.
Step-by-step instructions for correctly fitting the guide bar and saw chain to the chainsaw.
Instructions for fitting a spike bumper, advising to contact a service agent.
Information on changing the handle insert size for better ergonomics and user comfort.
Instructions for fitting a belt eyelet for attaching the saw to a belt or harness.
Details on the type of fuel required, mixing ratios, and recommendations for optimal engine performance.
Guidance on selecting and using the correct two-stroke oil for the chainsaw engine.
Information on choosing and using the correct chain oil for proper lubrication and machine longevity.
Safety precautions and procedures for safely refuelling the chainsaw with fuel and chain oil.
Important safety rules to follow when handling fuel and chain oil to prevent fire and explosion hazards.
Guidelines for safely transporting and storing the chainsaw and its fuel.
Steps for preparing the chainsaw for long-term storage to maintain its condition.
Detailed procedures for safely starting and stopping the chainsaw engine.
Specific steps for starting the chainsaw when the engine is cold.
Instructions for starting the chainsaw when the engine is warm.
Instructions on how to safely stop the chainsaw's engine using the stop switch.
A checklist of safety checks to perform on the chainsaw before starting any work.
Essential safety rules and advice for using the chainsaw effectively and safely in various situations.
General guidelines and best practices for operating the chainsaw safely and efficiently.
Detailed explanations and techniques to understand and prevent dangerous kickback incidents.
Specific working practices for using chainsaws safely at height with rope and harness systems.
Procedures for preparing the chainsaw before it is sent up to an operator working in a tree.
Advice on safe chainsaw usage when working at height in trees, focusing on two-handed operation.
Guidelines for maintaining a secure work position when operating the chainsaw with both hands in trees.
Specific procedures for safely starting the chainsaw while working in a tree.
Strong warnings against and reasons why one-hand chainsaw use is extremely dangerous.
Instructions on how to safely free a chainsaw that has become trapped while cutting.
Basic techniques for cutting logs that are lying on the ground, including support and tension considerations.
Techniques for safely cutting branches from a felled tree.
Detailed explanation of techniques for felling tree tops, including safety and direction control.
Explains how to make directional cuts to control the felling direction of a tree.
Describes the final felling cut and the importance of the felling hinge for controlling fall direction.
Procedures for safely releasing tension in a tree or branch that has fallen incorrectly.
Techniques for cutting wood that is under tension to avoid dangerous spring-back.
Comprehensive advice on understanding and preventing kickback incidents during chainsaw operation.
Information on carburettor adjustment, including the AutoTune function for optimal engine performance.
Guidelines for inspecting, maintaining, and servicing the chainsaw's safety features.
Steps for checking the wear and condition of the chain brake band and front hand guard.
Instructions for checking the chain catcher for damage and secure attachment.
How to regularly check the vibration damping units for cracks or deformation.
Procedures for checking the correct operation of the chainsaw's stop switch.
Instructions for checking the muffler's condition and cleaning the spark arrestor mesh.
Safety precautions and instructions for changing a broken or worn starter cord.
Steps for properly tensioning the recoil spring when assembling the starter.
Guidance on how to replace a broken recoil spring in the starter assembly.
Procedures for cleaning or replacing the air filter to prevent engine issues.
Information on checking, cleaning, and replacing the spark plug for optimal engine performance.
Instructions for lubricating the bar tip sprocket with grease for smooth operation.
Details on lubricating the needle bearing in the clutch drum for longevity.
How to adjust the oil pump to control the flow of chain oil.
Guidance on cleaning the cooling system components to prevent overheating.
Measures to take for operating the chainsaw in cold and snowy conditions.
Special considerations and available kits for running the machine in very cold temperatures.
Lists specifications for the chainsaw's engine, including displacement, bore, stroke, and power.
Details on fuel tank capacity, oil pump capacity, and oil tank capacity.
States the weight of the chainsaw without bar and chain.
Provides measured and guaranteed sound power levels according to EC directive.
Lists equivalent sound pressure level at the operator's ear.
Details equivalent vibration levels for the front and rear handles.
Lists approved guide bar lengths, usable cutting lengths, pitch, and drive link thickness.
Lists approved guide bar and saw chain combinations for the Husqvarna T540XP model.
Information and diagrams related to saw chain filing angles and recommended file gauges.
Declaration confirming the chainsaw's conformity with relevant European Union directives and standards.
To Next Page
