Husqvarna TE 125 User Manual

F1.13Part. N. 8000 H4704 (07-2010)
17
18
ENGINE OVERHAUL
CAMSHAFT CHECK
1. Check:
 
Discoloured blue/pittings/scratches Replace the
camshaft.
2. Measure:
 
  Replace the camshaft.

3. Check:
 
Obstruction 
ROCKER ARM AND ROCKER ARM SHAFTS CHECK
 
rocker arm shafts.
1. Check:
 
Damage/wear Replace.
2. Check:
 
Discoloured blue/excessive wear/pittings/scratches Replace
or check lubrication system.
3. Measure:
 
  
4. Measure:

  
Camshaft lobe dimensions
Intake A
30.225-30.325mm (1.1900-1.1939 in)
Limit
30.125 mm (1.1860 in)
Intake B
25.114-25.214mm (0.9887-0.9927in)
Limit
25.014mm (0.9848in)

30.261-30.361mm (1.1914-1.1953in)
Limit
30.161mm (1.1874in)

25.172-25.272mm (0.9910-0.9950in)
Limit
25.072mm (0.9871in)
Rocker arm inside diameter 9.985-10.000 mm 


Rocker arm outside diameter 9.966-9.976 mm 



Husqvarna TE 125 Specifications

General

Engine Type	Single cylinder, 2-stroke
Displacement	124.8 cc
Bore x Stroke	54 mm x 54.5 mm
Ignition	Kokusan
Transmission	6-speed
Rear Suspension	WP Monoshock
Front Tire	90/90-21
Cooling	Liquid cooled
Seat Height	960 mm
Front Suspension	WP USD Ø 48 mm
Front Brake	260 mm disc
Rear Brake	220 mm disc
Rear Tire	120/90-18
Starter	Kickstarter