Why are the headlight and position light not functioning on my Husqvarna Motorcycle?
If the headlight and position light are not functioning on your Husqvarna Motorcycle, it's likely that fuse 6 is blown. Change the fuses of individual power consumers.
Why are the turn signal, brake light, and horn not functional on my Husqvarna Vitpilen 401 2018?
If the turn signal, brake light, and horn are not functional on your Husqvarna Motorcycle, it is most likely caused by a blown fuse 4 or 6. Replace the fuses of individual power consumers.
Why is the time not displayed or not correctly displayed on my Husqvarna Motorcycle?
If the time is not displayed or not correctly displayed on your Husqvarna Motorcycle, it's likely that fuse 2 or 7 is blown. Change the fuses of individual power consumers.
General| Bore x Stroke | 89 mm x 60 mm |
|---|---|
| Compression Ratio | 12.6:1 |
| Fuel System | Electronic fuel injection |
| Starter | Electric |
| Transmission | 6-speed |
| Final Drive | Chain |
| Frame | Steel trellis frame |
| Rear Brake | 230 mm disc, single-piston caliper |
| Engine | 373.2cc liquid cooled single cylinder, four stroke engine |
| Power | 44 hp |
| Torque | 37 Nm @ 7, 000 rpm |
| Front Suspension | USD fork, 43 mm |
| Rear Suspension | Monoshock |
| Front Brake | 320 mm disc |
| Front Tire | 110/70-17 |
| Rear Tire | 150/60-17 |
| Seat Height | 830 mm |
| Fuel Capacity | 9.5 L |
Defines the intended use of the vehicle and highlights dangers associated with misuse.
General safety instructions and definitions of risk levels (Danger, Warning, Caution) with symbols.
Identifies and locates various warning and information labels on the motorcycle.
Critical guidelines for safe vehicle operation, including rider fitness and environmental factors.
Describes the location and function of the clutch and hand brake levers on the handlebar.
Details the throttle grip and the function of switches on the left side of the handlebar.
Details switches on the right handlebar, including ignition and steering lock functions.
Details the location and function of the shift lever, foot brake lever, and side stand.
Overview of the instrument cluster, its components, and activation sequence upon ignition.
Explains warning notes, indicator lamp functions, and how they signal vehicle status or issues.
Critical safety checks for first use and guidelines for the engine's running-in phase.
Safety warnings and recommendations regarding vehicle weight limits and proper luggage handling.
Checklist for pre-ride inspections and step-by-step instructions for starting the engine.
Guidance on smooth gear engagement for starting off and proper shifting techniques.
Instructions on effective brake application, ABS function, and safety warnings.
Procedures for safely stopping, parking the vehicle, and guidelines for transportation.
Instructions for refueling the motorcycle, including safety precautions and fuel type.
Instructions on adjusting the rear shock absorber's spring preload for different load conditions.
Explanation of the ABS system, its components, and warnings about modifications.
Procedure for checking the thickness and condition of the front and rear brake discs.
Instructions for verifying front and rear brake fluid levels and identifying potential issues.
Detailed steps for adding front and rear brake fluid, including safety precautions.
Method for checking the minimum thickness and condition of front and rear brake linings.
Step-by-step instructions for safely removing and reinstalling the front wheel.
Step-by-step instructions for safely removing and reinstalling the rear wheel.
Procedures for checking coolant level and antifreeze concentration with safety warnings.
Detailed steps for checking coolant levels in the compensating tank and radiator.
Procedure for checking engine oil level, considering engine temperature and waiting times.
Detailed steps for oil change, filter replacement, and oil screen cleaning.
To Next Page