HuTools HT01 - Activate the Keypad Sound; Enable Auto Lock Feature

G. Activate the Keypad Sound
① Push the HuTools button twice;
② Enter your own master code (which you have set before);
③ Push the HuTools button once, then the HuTools button will has green light (not flash)
and there's a long sound beep.
④ Press the number button "4", the HuTools button will has green light flash and a long
sound beep.
⑤ Press the number button "1", and then push the HuTools button once. The HuTools
button will has green light flash and a long sound beep.
The silent mode is off. You will hear the sound when you press the keypad.
H. Enable Auto Lock Feature
① Push the HuTools button twice;
② Enter your own master code (which you have set before);
③ Push the HuTools button once, then the HuTools button will has green light (not flash)
and there's a long sound beep.
④ Press the number button "5", the HuTools button will has green light flash and a long
sound beep.
⑤ Press the number button "1", then push the HuTools button once. The HuTools
button will has green light flash and a long sound beep.
⑥ The deadbolt latch will auto lock and extend out and in 30 seconds, with 2 short beep
sounds and red light flash on HuTools button.
The auto lock feature is enabled. It will auto lock in 30 seconds.