HuTools HT01 - Enable the Vacation Mode; Add One Time Pin Code

④ Press the number button "5", the HuTools button will has green light flash and a long
sound beep.
⑤ Press the number button "2", and then push the HuTools button once. The HuTools
button will has green light flash and a long sound beep.
The auto lock feature is off. You have to press any one button for 3 seconds to lock it. Or
use the mechanic key to lock the door.
K. Enable the Vacation Mode
① Push the HuTools button twice;
② Enter your own master code (which you have set before);
③ Push the HuTools button once, then the HuTools button will has green light (not flash)
and there's a long sound beep.
④ Press the number button "6". The HuTools button will has green light flash and a long
sound beep.
⑤ Push the HuTools button once. The HuTools button will has green light flash and a
long sound beep.
The vacation mode is enable. This is a security feature for you when you are leaving your
home for vacation or long trip. Enabling vacation mode will restrict all user codes until
master code is entered on keypad. If the lock is unlocked by thumb turn inside the door, the
lock will sound an alarm.
L. Add One Time Pin Code
① Push the HuTools button twice;
② Enter your own master code (which you have set before);