Unit setup/connection
LVU-CD-40
en(us)
Page 28 / 68
BeWa LVU-CD-40 4035823a en-us 2016-01-08.doc 2016-01-08
Connecting the water outlet
Connect the water outlet to a depressurized reservoir without cross-section
reduction. Reservoir height max. 1.5 m and no higher than the fluid level in
the tank.
The separated water can contain some parts of fuel.
Dispose of the water-fuel mixture in an environmentally
friendly manner.
NOTICE
Excess pressure at the water outlet
The unit will be damaged
► Guide the water outlet into a depressurized reservoir.
Electrical connection
The filtration unit has a connector cable with a power plug.
DANGER
Exposed electric terminals in the terminal
box of the electric motor
Danger of fatal injury due to electric shock
►
Any work involving the electrical system may
only be done by a properly trained, certified
electrician.
Unwind the connector cable fully. Plug the power plug into a suitable,
earthed, protected power outlet. Match the specifications for the power
supply and frequency on the unit with the network specifications.
The filtration unit has a thermal motor protection switch to protect it from
electrical overload.
To Next Page
Loading...
