Need help?Do you have a question about the Hydrajaws M2000 and is the answer not in the manual?
General| Brand | Hydrajaws |
|---|---|
| Model | M2000 |
| Category | Test Equipment |
| Language | English |
Overview of the M2000 pull-out tester system, its components, and capabilities.
Guidelines for intended use by skilled personnel with appropriate training and knowledge.
Critical safety precautions, warnings against modification, and proper accessory use for safe operation.
Details on pull-out load range, weight, stroke, load gauge, casing, and operating handle.
Step-by-step guide for setting up and performing general pull-out tests on fixings.
Method for using the integrated nut with a ratchet for better access in confined spaces.
How to use the bolt test adaptor directly and with slotted/threaded button adaptors.
Instructions for using M10, M12, M16, and M20 threaded stud adaptors for various anchors.
Procedure for using the insulation adaptor to test fixings in insulation materials.
Use of M5, M6, M8, M10 adaptors for remedial wall ties and threaded rod fixings.
Method for using the clevis adaptor for testing ringbolts and eyebolts.
System for testing scaffold anchors and ringbolts to specific guidance notes.
Kit and procedure for testing safety harness eyebolts and ladder restraint hooks.
Procedure for testing wall ties, including load application and specific connections.
Kit contents and procedure for determining bonding strengths of various materials.
Step-by-step guide for preparing samples and conducting pull-off tests on site.
Table correlating pull force readings with bond strength in MPa for different disc sizes.
Description of optional load spreading bridges for enhanced testing versatility.
Instructions for adjusting the telescopic legs for proper tester positioning.
Guidelines for lubrication, oil refilling, and calibration to maintain tester performance.
To Next Page
