THANK YOU: The employees and management of
HYDRO TEK SYSTEMS, INC. thank you for selecting
our products. The production and quality assurance
team have taken the greatest care to ensure that your
new pressure washer exceeds the standards set by
you, the customer, by Hydro Tek engineering and
ISO9001:2008 quality management standard, and by
UL1776 safety certification.
YOUR RESPONSIBILITY: This operator’s manual was
compiled for your benefit. By studying and following the
safety, installation, operation, maintenance, and
troubleshooting information contained within, you can
look forward to many years of trouble-free service from
your equipment. Every person who will operate the
equipment must read and follow the safety warning and
operating instruction sections of this owner’s manual
prior to use. You are responsible for operating the
product properly and safely. You are also responsible
to follow the maintenance schedule on the back page
of this manual to keep your warranty active.
FREIGHT DAMAGE: If delivered by a trucking
company, please inspect for any concealed freight
damage and note this on the paperwork from the
trucking company before signing. Should you find
damage has occurred during shipping, do not return the
damaged merchandise to Hydro Tek, but file a claim
immediately with the freight carrier involved.
QUESTIONS: Help us provide you with the fastest
service. Please locate the warranty registration card
enclosed and return it to Hydro Tek to register your
machine. If problems occur, contact the dealer you
bought your machine from, a local authorized Hydro
Tek service center, or call Hydro Tek at 1-(909) 799-
9222 option 4 or ask for technical services.
GETTING STARTED: If your dealer has not prepared
the machine for startup, you may need to connect the
hose to the pressure outlet on the washer and connect
the other end of the hose that swivels to the trigger gun
inlet and tighten. Mobile Wash Skids are engine
powered and shipped from the manufacturer with the
fuel tanks empty and without the battery. Connect the
battery cables (positive lead first) and follow the
operation instructions for starting. High Pressure
Steamers are electric powered and will require an
appropriate electric outlet or disconnect box and an
electric plug that is rated for your machine’s voltage and
amperage and matches to your electrical socket.
Smaller machines are equipped with a ground fault
interrupter on the electrical cord and you will need to
press the reset button after it is plugged in. (See
Operating Instruction section and enclosed page on
Installation Guidelines).
ONE YEAR PARTS & LABOR WARRANTY: Hydro
Tek Systems, Inc. (Hydro Tek) promises to repair Hydro
Tek branded power washers if defective in materials or
workmanship for one year from the date of original retail
purchase including the cost of PARTS and LABOR, but
you must pay transportation/shipping costs and travel
time.
LIFETIME PARTS/ONE YEAR LABOR WARRANTY:
The Spiralast™ heating coil (up to 4200psi) on the
Hydro Tek branded product line includes a lifetime parts
warranty and a replacement coil will be provided as
long as you own the machine. (Starting February 2014
mfg dates)
ONE YEAR PARTS WARRANTY: Hydro Tek will
provide replacement parts on accessories and on all
other product brands including Hot2Go power washers,
Hydro Vacuum, or Hot Link heaters. (Labor is not
included)
TWO YEAR EVAPORATIVE EMISSIONS CONTROL
SYSTEM WARRANTY: Hydro Tek will repair or replace
a defective evaporative emission control system
(EECS) part on your pressure washer for a period of
two years. (more information on next page)
Items and Conditions Not Covered:
1. Normal wear items such as discharge hose, guns,
wands, spray arms, nozzles, quick couplers, o-rings,
motor & generator brushes, filters, fuses, belts, & tires.
2. Cost of regular maintenance/adjustments, damage
from lack of maintenance or correct operation
3. Damage due to freezing, abrasive fluids, chemical
deterioration, scale build-up, or water ingress.
4. Damage from fluctuation in electrical or water
supply.
5. Any product or part that has been altered, modified,
over pressurized, misused, or has been in an accident.
6. Dealer installation or damage from improper
installation of the machine or alteration by a dealer or
promise of additional warranty from dealer. The
manufacturer warranty is not transferable from the
dealer to the retail purchaser on used or rented
equipment.
7. Labor is not paid if the dealer that serviced your
machine is not an authorized service center.
8. Labor is not paid on added accessories such as
surface cleaners, hose reels, wastewater recovery, hot
link water heaters, and filtration.
WARRANTY PROVIDED BY OTHERS: Gasoline and
diesel engines and some electric motors are warranted
by the manufacturer of the component and their
warranty is provided through the manufacturer’s service
centers. Contact your authorized distributor for the
closest repair center. Additional extended warranties
INTRODUCTION – WARRANTY 2
To Next Page
Loading...
Need help?
General
